​

​

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

​

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

​

For the fiscal year ended December 31, 2022

OR

​

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission file number 1-5467

VALHI, INC.

(Exact name of Registrant as specified in its charter)

​

​

​

Registrant’s telephone number, including area code: (972) 233-1700

​

Securities registered pursuant to Section 12(b) of the Act:

​

​

No Securities registered pursuant to Section 12(g) of the Act:

Indicate by check mark:

​

If the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.   Yes  ☐    No  ☒

If the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ☐    No  ☒

Whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).   Yes  ☒    No  ☐

Whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer,” smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Act.

​

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

​

Whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☒

​

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes  ☐   No  ☒.

​

The aggregate market value of the 2.4 million shares of voting common stock held by nonaffiliates of Valhi, Inc. as of June 30, 2022 (the last business day of the Registrant’s most recently-completed second fiscal quarter) approximated $109.6 million.

​

Number of shares of the registrant’s common stock, $.01 par value per share, outstanding on March 3, 2023: 28,279,493.

​

Documents incorporated by reference

​

​

​

​

​

​

PART I

ITEM 1.BUSINESS

Valhi, Inc. (NYSE: VHI) is primarily a holding company. We operate through our wholly-owned and majority-owned subsidiaries, including NL Industries, Inc., Kronos Worldwide, Inc., CompX International Inc., Basic Management, Inc. and The LandWell Company. Kronos (NYSE: KRO), NL (NYSE: NL) and CompX (NYSE American: CIX) each file periodic reports with the U.S. Securities and Exchange Commission (“SEC”).

Our principal executive offices are located at Three Lincoln Center 5430 LBJ Freeway, Suite 1700, Dallas, Texas 75240-2620. Our telephone number is (972) 233-1700. We maintain a website at www.valhi.net.

Brief History

LLC Corporation, our legal predecessor, was incorporated in Delaware in 1932. We are the successor company of the 1987 merger of LLC Corporation and another entity controlled by Contran Corporation. One of Contran’s wholly-owned subsidiaries held approximately 92% of Valhi’s outstanding common stock at December 31, 2022. As discussed in Note 1 to our Consolidated Financial Statements, Lisa K. Simmons and a trust established for the benefit of Ms. Simmons and her late sister and their children (the “Family Trust”) may be deemed to control Contran and us.

Key events in our history include:

-1-

​

Unless otherwise indicated, references in this report to “we”, “us” or “our” refer to Valhi, Inc. and its subsidiaries, taken as a whole.

Forward-Looking Statements

This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, as amended. Statements in this Annual Report that are not historical facts are forward-looking in nature and represent management’s beliefs and assumptions based on currently available information. In some cases, you can identify forward-looking statements by the use of words such as “believes,” “intends,” “may,” “should,” “could,” “anticipates,” “expects” or comparable terminology, or by discussions of strategies or trends. Although we believe that the expectations reflected in such forward-looking statements are reasonable, we do not know if these expectations will be correct. Such statements by their nature involve substantial risks and uncertainties that could significantly impact expected results. Actual future results could differ materially from those predicted. The factors that could cause actual future results to differ materially from those described herein are the risks and uncertainties discussed in this Annual Report and those described from time to time in our other filings with the SEC and include, but are not limited to, the following:

-2-

​

Should one or more of these risks materialize (or the consequences of such development worsen), or should the underlying assumptions prove incorrect, actual results could differ materially from those currently forecasted or expected.

-3-

​

We disclaim any intention or obligation to update or revise any forward-looking statement whether as a result of changes in information, future events or otherwise.

Segments

We currently have three consolidated reportable operating segments at December 31, 2022:

​

For additional information about our segments and equity investments see “Part II – Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” and Notes 2, 7 and 12 to our Consolidated Financial Statements.

CHEMICALS SEGMENT – KRONOS WORLDWIDE, INC.

Business Overview

Our majority-controlled subsidiary, Kronos, is a leading global producer and marketer of value-added titanium dioxide pigments, or TiO₂, a base industrial product used in a wide range of applications. Kronos, along with its distributors and agents, sells and provides technical services for its products to approximately 4,000 customers in 100 countries with the majority of sales in Europe, North America and the Asia Pacific region. We believe Kronos has developed considerable expertise and efficiency in the manufacture, sale, shipment and service of its products in domestic and international markets.

TiO₂ is a white inorganic pigment used in a wide range of products for its exceptional durability and its ability to impart whiteness, brightness and opacity. TiO₂ is a critical component of everyday applications, such as coatings, plastics and paper, as well as many specialty products such as inks, cosmetics and pharmaceuticals. TiO₂ is widely considered to

-4-

​

be superior to alternative white pigments in large part due to its hiding power (or opacity), which is the ability to cover or mask other materials effectively and efficiently. TiO₂ is designed, marketed and sold based on specific end-use applications.

TiO₂ is the largest commercially used whitening pigment because it has a high refractive rating, giving it more hiding power than any other commercially produced white pigment. In addition, TiO₂ has excellent resistance to interaction with other chemicals, good thermal stability and resistance to ultraviolet degradation. Although there are other white pigments on the market, we believe there are no effective substitutes for TiO₂ because no other white pigment has the physical properties for achieving comparable opacity and brightness or can be incorporated in as cost-effective a manner. Pigment extenders such as kaolin clays, calcium carbonate and polymeric opacifiers are used together with TiO₂ in a number of end-use markets. However, these products are not able to duplicate the opacity performance characteristics of TiO₂ and we believe these products are unlikely to have a significant impact on the use of TiO₂.

TiO₂ is considered a “quality-of-life” product. Demand for TiO₂ has generally been driven by worldwide gross domestic product and has generally increased with rising standards of living in various regions of the world. According to industry estimates, TiO₂ consumption has grown at a compound annual growth rate of approximately 2% since 2000. Per capita consumption of TiO₂ in Western Europe and North America far exceeds that in other areas of the world, and these regions are expected to continue to be the largest consumers of TiO₂ on a per capita basis for the foreseeable future. We believe Western Europe and North America currently each account for approximately 16% of global TiO₂ consumption. Markets for TiO₂ are generally increasing in China, the Asia Pacific region, South America and Eastern Europe and we believe these are significant markets which will continue to grow as economies in these regions develop and quality-of-life products, including TiO₂, experience greater demand.

Products and end-use markets

Including its predecessors, Kronos has produced and marketed TiO₂ in North America and Europe, its primary markets, for over 100 years. We believe Kronos is the largest TiO₂ producer in Europe with 45% of its 2022 sales volumes attributable to markets in Europe. The table below shows Kronos’ estimated market share for its significant markets, Europe and North America, for the last three years.

​

​

We believe Kronos is the leading seller of TiO₂ in several countries, including Germany. Overall, Kronos is one of the top five producers of TiO₂ in the world, with an estimated 7% share of worldwide TiO₂ sales volume in 2022.

Kronos offers its customers a broad portfolio of products that include over 40 different TiO₂ pigment grades under the KRONOS^® trademark, which provide a variety of performance properties to meet customers’ specific requirements. Kronos’ major customers include domestic and international paint, plastics, decorative laminate and paper manufacturers. Kronos ships TiO₂ to its customers in either a dry or slurry form via rail, truck and/or ocean carrier. Sales of Kronos’ core TiO₂ pigments represented approximately 92% of our Chemicals Segment’s net sales in 2022. Kronos and its agents and distributors primarily sell its products in three major end-use markets: coatings, plastics and paper.

The following tables show Kronos’ approximate TiO₂ sales volume by geographic region and end-use for the year ended December 31, 2022:

​

-5-

​

​

Some of the principal applications for Kronos’ products include the following:

TiO₂ for coatings – Kronos’ TiO₂ is used to provide opacity, durability, tinting strength and brightness in industrial coatings, as well as coatings for commercial and residential interiors and exteriors, automobiles, aircraft, machines, appliances, traffic paint and other special purpose coatings. The amount of TiO₂ used in coatings varies widely depending on the opacity, color and quality desired. In general, the higher the opacity requirement of the coating, the greater the TiO₂ content.

TiO₂ for plastics – Kronos produces TiO₂ pigments that improve the optical and physical properties of plastics, including whiteness and opacity. TiO₂ is used to provide opacity to items such as containers and packaging materials, and vinyl products such as windows, door profiles and siding. TiO₂ also generally provides hiding power, neutral undertone, brightness and surface durability for housewares, appliances, toys, computer cases and food packages. TiO₂’s high brightness along with its opacity, is used in some engineering plastics to help mask their undesirable natural color. TiO₂ is also used in masterbatch, which is a concentrate of TiO₂ and other additives and is one of the largest uses for TiO₂ in the plastics end-use market. In masterbatch, the TiO₂ is dispersed at high concentrations into a plastic resin and is then used by manufacturers of plastic containers, bottles, packaging and agricultural films.

TiO₂ for paper – Kronos’ TiO₂ is used in the production of several types of paper, including laminate (decorative) paper, filled paper and coated paper to provide whiteness, brightness, opacity and color stability. Although Kronos sells its TiO₂ to all segments of the paper end-use market, its primary focus is on the TiO₂ grades used in paper laminates, where several layers of paper are laminated together using melamine resin under high temperature and pressure. The top layer of paper contains TiO₂ and plastic resin and is the layer that is printed with decorative patterns. Paper laminates are used to replace materials such as wood and tile for such applications as counter tops, furniture and wallboard. TiO₂ is beneficial in these applications because it assists in preventing the material from fading or changing color after prolonged exposure to sunlight and other weathering agents.

TiO₂ for other applications – Kronos produces TiO₂ to improve the opacity and hiding power of printing inks. TiO₂ allows inks to achieve very high print quality while not interfering with the technical requirements of printing machinery, including low abrasion, high printing speed and high temperatures. Kronos’ TiO₂ is also used in textile applications where TiO₂ functions as an opacifying and delustering agent. In man-made fibers such as rayon and polyester, TiO₂ corrects an otherwise undesirable glossy and translucent appearance. Without the presence of TiO₂, these materials would be unsuitable for use in many textile applications.

Kronos produces high purity sulfate process anatase TiO₂ used to provide opacity, whiteness and brightness in a variety of cosmetic and personal care products, such as skin cream, lipstick, eye shadow and toothpaste. In pharmaceuticals, Kronos’ TiO₂ is used commonly as a colorant in tablet and capsule coatings as well as in liquid medicines to provide uniformity of color and appearance. KRONOS^® purified anatase grades meet the applicable requirements of the CTFA (Cosmetics, Toiletries and Fragrances Association), USP and BP (United States Pharmacopoeia and British Pharmacopoeia) and the FDA (United States Food and Drug Administration).

Kronos’ TiO₂ business is enhanced by the following three complementary businesses, which comprised approximately 8% of our Chemicals Segment’s net sales in 2022:

-6-

​

Manufacturing, operations and properties

Kronos produces TiO₂ in two crystalline forms: rutile and anatase. Rutile TiO₂ is manufactured using both a chloride production process and a sulfate production process, whereas anatase TiO₂ is only produced using a sulfate production process. Manufacturers of many end-use applications can use either form, especially during periods of tight supply for TiO₂. The chloride process is the preferred form for use in coatings and plastics, the two largest end-use markets. Due to environmental factors and customer considerations, the proportion of TiO₂ industry sales represented by chloride process pigments has remained stable relative to sulfate process pigments, and in 2022, chloride process production facilities represented approximately 45% of industry capacity. The sulfate process is preferred for use in selected paper products, ceramics, rubber tires, man-made fibers, pharmaceuticals and cosmetics. Once an intermediate TiO₂ pigment has been produced by either the chloride or sulfate process, it is “finished” into products with specific performance characteristics for particular end-use applications through proprietary processes involving various chemical surface treatments and intensive micronizing (milling).

Kronos produced 517,000, 545,000 and 492,000 metric tons of TiO₂ in 2020, 2021 and 2022, respectively. Kronos’ production volumes include its share of the output produced by its TiO₂ manufacturing joint venture discussed below. Kronos’ average production capacity utilization rates were approximately 92% in 2020, full practical capacity in 2021 and 89% in 2022. Kronos’ production rates in 2020 were impacted by the COVID-19 pandemic (primarily in the third quarter). In the fourth quarter of 2022 Kronos adjusted production levels to correspond with reduced customer demand in its European and export markets resulting from challenging economic conditions and geopolitical uncertainties.

Kronos operates facilities throughout North America and Europe, including the only sulfate process plant in North America and four TiO₂ plants in Europe (one in each of Leverkusen, Germany; Nordenham, Germany; Langerbrugge, Belgium; and Fredrikstad, Norway). In North America, Kronos has a TiO₂ plant in Varennes, Quebec, Canada and, through the manufacturing joint venture described below, a 50% interest in a TiO₂ plant near Lake Charles, Louisiana.

As part of Kronos’ long-term strategy to increase chloride process production, Kronos phased-out sulfate production at its Leverkusen facility during 2020. Kronos’ chloride process production and remaining sulfate production capacity has increased by approximately 5% over the past ten years due to debottlenecking programs, with only moderate capital expenditures. Kronos operated its facilities at reduced capacities in the fourth quarter of 2022 and into 2023. Based on current assumptions about market performance and demand, Kronos expects to operate its TiO₂ plants at 80% to 90% capacity in the first half of 2023 and near full practical capacity levels by the second half of 2023.

​

-7-

​

The following table presents the division of Kronos’ expected 2023 manufacturing capacity by plant location and type of manufacturing process:

Kronos owns the land underlying all of its principal production facilities unless otherwise indicated in the table above.

Kronos also operates an ilmenite mine in Norway pursuant to a governmental concession with an unlimited term. In addition, Kronos operates a rutile slurry manufacturing plant near Lake Charles, Louisiana, which converts dry pigment primarily manufactured for it at the Lake Charles TiO₂ facility into a slurry form that is then shipped to customers.

Kronos has corporate and administrative offices located in the U.S., Germany, Norway, Canada, Belgium and France.

TiO₂ manufacturing joint venture

Kronos Louisiana, Inc., one of Kronos’ subsidiaries, and Venator Investments each own a 50% interest in a manufacturing joint venture, Louisiana Pigment Company, L.P. (LPC). LPC owns and operates a chloride-process TiO₂ plant located near Lake Charles, Louisiana. Kronos and Venator share production from the plant equally pursuant to separate offtake agreements, unless Kronos and Venator otherwise agree.

A supervisory committee directs the business and affairs of the joint venture, including production and output decisions. This committee is composed of four members, two of whom Kronos appoints and two of whom Venator appoints. Two general managers manage the operations of the joint venture acting under the direction of the supervisory committee. Kronos appoints one general manager and Venator appoints the other.

-8-

​

We do not consolidate LPC because we do not control it. We account for Kronos’ interest in the joint venture by the equity method. The joint venture operates on a break-even basis and therefore we do not have any equity in earnings of the joint venture. Kronos is required to purchase one half of the TiO₂ produced by the joint venture. All costs and capital expenditures are shared equally with Venator with the exception of feedstock (purchased natural rutile ore or chlorine slag) and packaging costs for the pigment grades produced. Kronos’ share of net costs is reported as cost of sales as the TiO₂ is sold. See Notes 7 and 17 to our Consolidated Financial Statements.

Raw materials

The primary raw materials used in chloride process TiO₂ are titanium-containing feedstock (purchased natural rutile ore or chlorine slag), chlorine and petroleum coke. Chlorine is available from a number of suppliers, while petroleum coke is available from a limited number of suppliers. Titanium-containing feedstock suitable for use in the chloride process is available from a limited but increasing number of suppliers principally in Australia, South Africa, Sierra Leone, Canada and India. Kronos purchases feedstock for its chloride process TiO₂ from the following primary suppliers for certain contractually specified volumes for delivery extending in some cases, through 2026:

In the past Kronos has been, and it expects that it will continue to be, successful in obtaining short-term and long-term extensions to these and other existing supply contracts prior to their expiration. Kronos expects the raw materials purchased under these contracts, and contracts that it may enter into, will meet its chloride process feedstock requirements over the next several years.  Contracts may be terminated with a 12-month written notice (generally for multi-year agreement terms) or based on certain defaults by either party or failure to agree on pricing as noted in the agreements.

The primary raw materials used in sulfate process TiO₂ are titanium-containing feedstock, primarily ilmenite or purchased sulfate grade slag and sulfuric acid. Sulfuric acid is available from a number of suppliers. Titanium-containing feedstock suitable for use in the sulfate process is available from a limited number of suppliers principally in Norway, Canada, Australia, India and South Africa. As one of the few vertically-integrated producers of sulfate process TiO₂, Kronos operates a rock ilmenite mine in Norway, which provided all of the feedstock for its European sulfate process TiO₂ plants in 2022. Kronos expects ilmenite production from its mine to meet its European sulfate process feedstock requirements for the foreseeable future. For its Canadian sulfate process plant, Kronos purchases sulfate grade slag primarily from Rio Tinto Fer et Titane Inc. under a supply contract that renews annually, subject to termination upon twelve months written notice. Kronos expects the raw materials purchased under this contract, and contracts that it may enter into, to meet its sulfate process feedstock requirements over the next several years.

Many of Kronos’ raw material contracts contain fixed quantities it is required to purchase, or specify a range of quantities within which it is required to purchase. The pricing under these agreements is generally negotiated quarterly or semi-annually.

​

-9-

​

The following table summarizes Kronos’ raw materials purchased or mined in 2022.

​

Sales and marketing

Kronos’ marketing strategy is aimed at developing and maintaining strong relationships with new and existing customers. Because TiO₂ represents a significant input cost for its customers, the purchasing decisions are often made by Kronos’ customers’ senior management. Kronos works to maintain close relationships with the key decision makers through in-depth and frequent contact. Kronos endeavors to extend these commercial and technical relationships to multiple levels within its customers’ organizations using its direct sales force and technical service group to accomplish this objective. Kronos believes this helps build customer loyalty and strengthens its competitive position. Close cooperation and strong customer relationships enable Kronos to stay closely attuned to trends in its customers’ businesses. Where appropriate, Kronos works in conjunction with its customers to solve formulation or application problems by modifying specific product properties or developing new pigment grades. Kronos also focuses its sales and marketing efforts on those geographic and end-use market segments where it believes it can realize higher selling prices. This focus includes continuously reviewing and optimizing its customer and product portfolios.

Kronos also works directly with its customers to monitor the success of its products in their end-use applications, evaluates the need for improvements in its product and process technology and identifies opportunities to develop new product solutions for its customers. Kronos’ marketing staff closely coordinates with its sales force and technical specialists to ensure the needs of its customers are met, and to help develop and commercialize new grades where appropriate.

Kronos sells a majority of its products through its direct sales force operating in Europe and North America. Kronos also utilizes sales agents and distributors who are authorized to sell its products in specific geographic areas. In Europe, Kronos’ sales efforts are conducted primarily through its direct sales force and its sales agents. Kronos’ agents do not sell any TiO₂ products other than KRONOS^® branded products. In North America, its sales are made primarily through its direct sales force and supported by a network of distributors. Kronos has increased its marketing efforts over the last several years in export markets and its sales are now made through its direct sales force, sales agents and distributors. In addition to its direct sales force and sales agents, many of Kronos’ sales agents also act as distributors to service its customers in all regions. Kronos offers customer and technical service to customers who purchase its products through distributors as well as to its larger customers serviced by its direct sales force.

Kronos sells to a diverse customer base with only one customer representing 10% or more of our Chemicals Segment’s net sales in 2022 (Behr Process Corporation – 10%). Kronos’ largest ten customers accounted for approximately 33% of our Chemicals Segment’s net sales in 2022.

Neither our Chemicals Segment’s business as a whole nor any of its principal product groups is seasonal to any significant extent. However, TiO₂ sales are generally higher in the second and third quarters of the year, due in part to the increase in coatings production in the spring to meet demand during the spring and summer painting seasons. With certain exceptions, such as during the third quarter of 2020 as a result of the COVID-19 pandemic, and during the fourth quarter of 2022 as a result of reduced customer demand and unprecedentedly high energy costs, Kronos has historically operated its production facilities at near full capacity rates throughout the entire year, which among other things helps to minimize its per-unit production costs. As a result, Kronos normally builds inventories during the first and fourth quarters of each year in order to maximize its product availability during the higher demand periods normally experienced in the second and third quarters.

-10-

​

Competition

The TiO₂ industry is highly competitive. Kronos competes primarily on the basis of price, product quality, technical service and the availability of high performance pigment grades. Since TiO₂ is not traded through a commodity market, its pricing is largely a product of negotiation between suppliers and their respective customers. Price and availability are the most significant competitive factors along with quality and customer service for the majority of Kronos’ product grades. Increasingly, Kronos is focused on providing pigments that are differentiated to meet specific customer requests and specialty grades that are differentiated from its competitors’ products. During 2022, Kronos had an estimated 7% share of worldwide TiO₂ sales volume, and based on sales volume, we believe Kronos is the leading seller of TiO₂ in several countries, including Germany.

Kronos’ principal competitors are The Chemours Company, Tronox Incorporated, LB Group Co. Ltd. and Venator Materials PLC. The top five TiO₂ producers (i.e. Kronos and its four principal competitors) account for approximately 52% of the world’s production capacity.

The following chart shows our estimate of worldwide production capacity in 2022:

​

Chemours has approximately one-half of total North American TiO₂ production capacity and is Kronos’ principal North American competitor. LB Group Co. Ltd. previously announced it plans to add an additional 200,000 tons of chloride capacity which we expect will be added incrementally over the next several years.

The TiO₂ industry is characterized by high barriers to entry consisting of high capital costs, proprietary technology and significant lead times required to construct new facilities or to expand existing capacity. Therefore, over the past ten years, Kronos and its competitors increased industry capacity through debottlenecking projects, although this increase only partly compensated for the shut-down of various TiO₂ plants throughout the world. Although overall industry demand is expected to increase in 2023, other than through debottlenecking projects and the LB Group Co. Ltd. expansion mentioned above, Kronos does not expect any significant efforts will be undertaken by it or its principal competitors to further increase capacity and Kronos believes it is unlikely any new TiO₂ plants will be constructed in Europe or North America for the foreseeable future. If actual developments differ from Kronos’ expectations, the TiO₂ industry’s and Kronos’ performance could be unfavorably affected.

Research and development

Kronos employs scientists, chemists, process engineers and technicians who are engaged in research and development, process technology and quality assurance activities in Leverkusen, Germany. These individuals have the responsibility for improving Kronos’ chloride and sulfate production processes, improving product quality and strengthening its competitive position by developing new products and applications. Kronos’ expenditures for these activities were approximately $16 million in 2020, $17 million in 2021 and $15 million in 2022. Kronos expects to spend approximately $17 million on research and development in 2023.

Kronos continually seeks to improve the quality of its grades and has been successful at developing new grades for existing and new applications to meet the needs of its customers and increase product life cycles. Since the beginning of 2017, Kronos has added nine new grades for pigments and other applications.

-11-

​

Patents, trademarks, trade secrets and other intellectual property rights

Kronos has a comprehensive intellectual property protection strategy that includes obtaining, maintaining and enforcing its patents, primarily in the United States, Canada and Europe. Kronos also protects its trademark and trade secret rights and has entered into license agreements with third parties concerning various intellectual property matters. Kronos has also from time to time been involved in disputes over intellectual property.

Patents – Kronos has obtained patents and has numerous patent applications pending that cover its products and the technology used in the manufacture of its products. Kronos’ patent strategy is important to it and its continuing business activities. In addition to maintaining its patent portfolio, Kronos seeks patent protection for its technical developments, principally in the United States, Canada and Europe. U.S. patents are generally in effect for 20 years from the date of filing. Kronos’ U.S. patent portfolio includes patents having remaining terms ranging from one year to 20 years.

Trademarks and trade secrets – Kronos’ trademarks, including KRONOS^®, are covered by issued and/or pending registrations, including in Canada and the United States. Kronos protects the trademarks it uses in connection with the products it manufactures and sells and has developed goodwill in connection with its long-term use of its trademarks. Kronos conducts research activities in secret and it protects the confidentiality of its trade secrets through reasonable measures, including confidentiality agreements and security procedures, including data security. Kronos relies upon unpatented proprietary knowledge and continuing technological innovation and other trade secrets to develop and maintain its competitive position. Kronos’ proprietary chloride production process is an important part of its technology and its business could be harmed if it fails to maintain confidentiality of its trade secrets used in this technology.

Regulatory and environmental matters

Kronos’ operations and properties are governed by various environmental laws and regulations which are complex, change frequently and have tended to become stricter over time. These environmental laws govern, among other things, the generation, storage, handling, use and transportation of hazardous materials; the emission and discharge of hazardous materials into the ground, air, or water; and the health and safety of Kronos’ employees. Certain of Kronos’ operations are, or have been, engaged in the generation, storage, handling, manufacture or use of substances or compounds that may be considered toxic or hazardous within the meaning of applicable environmental laws and regulations.  As with other companies engaged in similar businesses, certain of Kronos’ past and current operations and products have the potential to cause environmental or other damage. Kronos has implemented and continues to implement various policies and programs in an effort to minimize these risks. Kronos’ policy is to comply with applicable environmental laws and regulations at all its facilities and to strive to improve its environmental performance and overall sustainability. It is possible that future developments, such as stricter requirements in environmental laws and enforcement policies, could adversely affect Kronos’ operations, including production, handling, use, storage, transportation, sale or disposal of hazardous or toxic substances or require Kronos to make capital and other expenditures to comply, and could adversely affect our consolidated financial position and results of operations or liquidity.  During 2021, Kronos was notified by government authorities in Norway that the classification of a dam at its mine facilities was changed to the highest level for Norwegian classification of dam structures.  As a result, Kronos’ mine operations are subject to a higher degree of oversight and regulation than existed prior to this change in classification, and Kronos has increased its capital expenditures to adapt to the higher classification standards.

Kronos has a history of identifying new ways to reduce consumption and waste by converting byproducts to co-products through its KRONOS ecochem® products. Annually Kronos updates and publishes its Safety, Environment, Energy and Quality Policy which is translated into local languages and distributed to all its employees and shared publicly via its website.  Kronos has implemented rigorous procedures for incident reporting and investigation, including root cause analysis of environmental and safety incidents and near misses. Because TiO₂ production requires significant energy input, Kronos is focused on energy efficiency at all production locations. Three of its five production facilities maintain certifications to the ISO 50001:2018 Energy Management standard and all locations have local energy teams in place.  These teams are responsible for maintaining ISO 50001:2018 certifications (where applicable), performing regular reviews of local energy consumption, making recommendations regarding capital projects  that reduce energy consumption and associated Greenhouse Gas (“GHG”) emissions or enhance efficiency. When possible, Kronos looks for opportunities to partner with local government authorities through grant opportunities to reduce energy consumption and associated GHG

-12-

​

emissions.  Kronos also actively manages potential water-related risks, including flooding and water shortages.  Kronos’ manufacturing facilities are strategically located adjacent to sources of water, which it uses for process operations and for shipping and receiving raw materials and finished products. Water-critical processes are identified and ongoing efforts to minimize water use are incorporated into environmental planning.

Kronos’ U.S. manufacturing operations are governed by federal, state, and local environmental and worker health and safety laws and regulations.  These include the Resource Conservation and Recovery Act, or RCRA, the Occupational Safety and Health Act, the Clean Air Act, the Clean Water Act, the Safe Drinking Water Act, the Toxic Substances Control Act and the Comprehensive Environmental Response, Compensation and Liability Act, as amended by the Superfund Amendments and Reauthorization Act, or CERCLA, as well as the state counterparts of these statutes.  Some of these laws hold current or previous owners or operators of real property liable for the costs of cleaning up contamination, even if these owners or operators did not know of, and were not responsible for, such contamination. These laws also assess liability on any person who arranges for the disposal or treatment of hazardous substances, regardless of whether the affected site is owned or operated by such person.  Although Kronos has not incurred and does not currently anticipate any material liabilities in connection with such environmental laws, Kronos may be required to make expenditures for environmental remediation in the future.

While the laws regulating operations of industrial facilities in Europe vary from country to country, a common regulatory framework is provided by the European Union, or the EU.  Germany and Belgium are members of the EU and follow its initiatives.  Norway is not a member but generally patterns its environmental regulatory actions after those of the EU.

From time to time, Kronos’ facilities may be subject to environmental regulatory enforcement under U.S. and non-U.S. statutes.  Typically, Kronos establishes compliance programs to resolve these matters.  Occasionally, Kronos may pay penalties.  To date, such penalties have not involved amounts having a material adverse effect on our consolidated financial position, results of operations or liquidity.  Kronos believes all of its facilities are in substantial compliance with applicable environmental laws.

From time to time, new environmental, health and safety regulations are passed or proposed in the countries in which Kronos operates or sells its products, seeking to regulate its operations or to restrict, limit or classify TiO₂.  Kronos believes it is in substantial compliance with laws applicable to the regulation of TiO₂.  However, increased regulatory scrutiny could affect consumer perception of TiO₂ or limit the marketability and demand for TiO₂ or products containing TiO₂ and increase Kronos’ regulatory and compliance costs.

On October 1, 2021, EU Regulation No. 1272/2008 classifying dry TiO₂ and mixtures containing dry TiO₂ as a suspected carcinogen via inhalation went into force. Kronos’ dry TiO₂ products do not meet the criteria set forth in the regulation and therefore do not require classification labels. On November 23, 2022 the Court of Justice of the European Union annulled the classification of TiO₂ as a suspected carcinogen in its entirety.

Kronos’ capital expenditures related to ongoing environmental compliance, protection and improvement programs, including capital expenditures which are primarily focused on increasing operating efficiency but also result  in  improved  environmental  protection  such  as  lower  emissions  from its manufacturing facilities, were $17.6 million in 2022 and are currently expected to be approximately $20 million in 2023.

COMPONENT PRODUCTS SEGMENT – COMPX INTERNATIONAL INC.

Business overview

Through our majority-controlled subsidiary, CompX, we are a leading manufacturer of security products including mechanical and electrical cabinet locks and other locking mechanisms used in postal, recreational transportation, office and institutional furniture, cabinetry, tool storage and healthcare applications. CompX also manufactures wake enhancement systems, stainless steel exhaust systems, gauges, throttle controls, trim tabs and related hardware and accessories for the recreational marine and other industries. CompX continuously seeks to diversify into new markets and

-13-

​

identify new applications and features for its products, which it believes provides a greater potential for higher rates of earnings growth as well as diversification of risk.

Manufacturing, operations and products

Security Products. CompX’s security products reporting unit manufactures mechanical and electrical cabinet locks and other locking mechanisms used in a variety of applications including mailboxes, ignition systems, file cabinets, desk drawers, tool storage cabinets, high security medical cabinetry, integrated inventory and access control secured narcotics boxes, electronic circuit panels, storage compartments, gas station security, vending and cash containment machines. CompX’s security products reporting unit has one manufacturing facility in Mauldin, South Carolina and one in Grayslake, Illinois which is shared with its marine components reporting unit. CompX believes it is a North American market leader in the manufacture and sale of cabinet locks and other locking mechanisms. These products include:

A substantial portion of Security Products’ sales consist of products with specialized adaptations to an individual customer’s specifications, some of which are listed above. CompX also has a standardized product line suitable for many customers, which is offered through a North American distribution network to locksmith and smaller original equipment manufacturer distributors via its STOCK LOCKS^® distribution program.

Marine Components. CompX’s marine components reporting unit manufactures and distributes wake enhancement systems, stainless steel exhaust components, gauges, throttle controls, trim tabs and related hardware and accessories primarily for ski/wakeboard boats (tow boats) and performance boats. CompX’s marine components reporting unit has a facility in Neenah, Wisconsin and a facility in Grayslake, Illinois which is shared with its security products reporting unit. CompX’s specialty marine component products are high precision components designed to operate within tight tolerances in the highly demanding marine environment. These products include:

​

-14-

​

CompX operated three principal operating facilities at December 31, 2022 as shown below.

SP- Security Products

MC- Marine Components

Raw materials

CompX’s primary raw materials are:

These raw materials are purchased from several suppliers, are readily available from numerous sources and accounted for approximately 17% of our Component Products Segment’s total cost of sales for 2022. Total material costs, including purchased components, represented approximately 47% of our Component Products Segment’s cost of sales in 2022.

CompX occasionally enters into short-term commodity-related raw material supply arrangements to mitigate the impact of future price increases in commodity-related raw materials, including zinc, brass and stainless steel. These arrangements generally provide for stated unit prices based upon specified purchase volumes, which help CompX to stabilize its commodity-related raw material costs to a certain extent. At other times CompX may make spot market buys of larger quantities of raw materials to take advantage of favorable pricing or volume-based discounts. Prices for the primary commodity-related raw materials used in the manufacture of locking mechanisms, primarily zinc and brass, generally increased throughout 2021 and the first half of 2022. Prices began to stabilize in the latter half of 2022, although at elevated levels. The prices for stainless steel, the primary raw material used for the manufacture of marine exhaust headers and pipes and wake enhancement systems, experienced significant volatility during 2021 and 2022. Based on current economic conditions, CompX expects the prices for zinc, brass, stainless steel and other manufacturing materials in 2023 to be relatively stable, although at the elevated levels it experienced in the second half of 2022. When purchased on the spot market, each of these raw materials may be subject to sudden and unanticipated price increases. When possible, CompX seeks to mitigate the impact of fluctuations in these raw material costs on its margins through improvements in production efficiencies or other operating cost reductions. In the event CompX is unable to offset raw material cost increases with other cost reductions, it may be difficult to recover those cost increases through increased product selling prices or raw material surcharges due to the competitive nature of the markets in which it competes. Consequently, overall operating margins can be affected by commodity-related raw material cost pressures. Commodity market prices are cyclical, reflecting overall economic trends, specific developments in consuming industries and speculative investor activities.

Patents and trademarks

CompX holds a number of patents relating to its component products, certain of which it believes to be important to it and its continuing business activity. Patents generally have a term of 20 years, and CompX’s patents have remaining

-15-

​

terms ranging from 1 year to 18 years at December 31, 2022. CompX’s major trademarks and brand names in addition to CompX^® include: